Aura
Aqua Lack 70
- Water-based, glossy.
- Surface protection from contamination and moisture.
- Transparent, elastic, durable film.
- Has no unpleasant odor.
Download data sheet Properties Interior acrylic water-soluble varnish. - Protects the surface from contamination and moisture. - Prevents wood from yellowing. - Forms a glossy transparent, elastic and durable film. - Does not change the color of the wood. - Has good adhesion to various types of surfaces. - Ideal for decorating walls and ceilings painted with water-dispersion paints. - Withstands repeated cleaning using neutral household detergents. - Does not have an unpleasant odor. Purpose Intended for finishing mineral, wooden, as well as previously painted or wallpapered surfaces. The varnish is used to make surfaces moisture and wear-resistant. The varnish is intended for use indoors. The varnish is not intended for steam rooms, floors and surfaces subject to strong mechanical wear. Types of surfaces for painting Surfaces for application: mineral surfaces (concrete, brick, plastered, stone, etc.), wooden surfaces (wall and ceiling panels, logs, beams, fiberboard, chipboard, etc.), as well as surfaces previously painted or wallpapered.
EC base - rich tones
CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 13300:2024.
Decoration and special properties.
Binder type: copolymer acrylic resin.
Glossy.
Resistance to wet abrasion: class 1.
Surface preparation before painting
The humidity of wooden surfaces should not exceed 18%. The surface should be clean, degreased, dry, and strong. It is recommended to prime new wood with a suitable primer and sand it with sandpaper, removing dust. Remove old peeling coatings (varnish, paint, etc.) completely, treat the surface with sandpaper, remove dust. Surfaces previously painted with oil or alkyd paint, alkyd varnish, as well as shiny surfaces, treat with sandpaper until matte, remove dust. If necessary, fill and prime the surface with appropriate materials. Prime mineral bases with high absorption capacity with TM AURA or TM Eskaro Aquastop primer.
Application
Be sure to mix the varnish before use. Apply with a brush, roller, or spray gun in 2–3 layers. It is recommended to apply the varnish along the wood fibers from edge to edge of the surface. If necessary, for applying the first (priming) layer, the varnish can be diluted with water no more than 5% by volume. Work should be carried out at ambient and base temperatures from +5ºС to +30ºС. When processing new wood, after the first layer has dried, sand the surface with fine sandpaper and remove dust. Apply the next layer of varnish no earlier than 2 hours after applying the previous one. Applying varnish in conditions of direct sunlight, drafts and high temperatures can lead to coating defects. The color of the surface coated with tinted varnish depends on the number and thickness of the applied layers of varnish, as well as on the color of the substrate (including the shade and type of wood). It is recommended to apply the last layer with untinted varnish.
Publication: Paint wood with tinted varnish correctly!
Working tools
Brush, varnish roller, spray gun.
Cleaning of tools
Rinse with water immediately after use. Dried varnish can be cleaned mechanically.
Copolymer acrylic dispersion, water, wax, additives. UA VOC limit value for this product (Cat. A/b): 100 g/l (g/l). This product contains max 100 g/l (g/l) VOC.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The varnish is fire and explosion-proof.
Disposal
Remains of dried varnish should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
1 L (1.02 kg) - 2.5 L (2.55 kg) - 5 L (5.1 kg) - 10 L (10.2 kg)