Eskaro Ukraine is part of an international group Eskaro Group
Eskaro Contact Grunt

Eskaro
Contact Grunt

  • Ready to use
  • Creates a cohesive adhesive layer
  • For complex substrates
  • For heavy mixtures and ceramic tiles
water year3 rashod_350_g_m no_cold pr5 dry_12_24 appl_brush_roll_5

Properties Water-soluble acrylic primer with mineral filler for interior and exterior work. - Excellent adhesion to substrates, including smooth ones. - Special set of mineral fillers. - Creates a uniformly rough surface for applying heavy plasters and putties, ceramic tiles, adhesive mixtures, as well as other structural materials. - After drying, creates a strong and moisture-resistant coating. - Does not get wet and maintains high adhesion strength under conditions of high humidity. - Maximum ease of use - does not settle and does not require constant mixing. - Maintains surface vapor permeability. - Odorless. Purpose For processing dense, glossy, non-absorbent or weakly absorbent substrates to create an intermediate adhesion layer before applying gypsum, gypsum-lime, lime-cement, etc. plasters during interior and exterior work. Can be used for repair work in old buildings where oil and alkyd paints were used for painting walls. Recommended as a bonding adhesive primer for treating ceramic tile coatings before re-facing the surface. Types of surfaces for application Monolithic concrete walls, floors, reinforced concrete structures, plasterboard, etc.

Color
Light pink.
Consumption
4-9 m²/l (150-350 g/m²) per coat. The primer consumption depends on the type of surface and the method of application.
Drying time
12-24 hours at a temperature of +20±2°C and a relative humidity of 65±5%. In case of a decrease in air temperature, the drying time increases accordingly.

Surface preparation

The surface for priming must be dry, thoroughly cleaned of loose, flaking surface layer, dust, dirt, grease. Wash heavily soiled and greasy surfaces with a 3-5% soda solution, then rinse with water and dry. Surfaces that are frequently wetted and prone to mold should be treated with Biotol or Biotol Spray before priming. If necessary, pre-treat metal surfaces with an anti-corrosion primer.

Application

Stir the primer before use and if necessary during operation. If necessary, dilute with water (up to 5% by weight). Apply with a roller or brush in one layer at a temperature not lower than +5°C. Do not apply to frozen and damp surfaces. Until the primer dries completely, ensure that the temperature does not drop below +5°C. Apply plaster and other materials after the primer has completely dried. After the primer has dried, do not allow dust to get on the treated surface before starting plastering work.

Working tools

Applied with a brush, roller.

Cleaning tools

Immediately after work, wash tools and equipment with warm soapy water. Fresh primer is removed with soapy water, dried - mechanically.

Composition

Acrylic dispersion, fillers, functional additives, water. UA VOC limit value for this product (cat. A/7): <30 g/l (g/l). This product contains max 1 g/l (g/l) VOC.

Warranty shelf life
3 years.
Frost resistance
Not frost-resistant during storage.
Storage conditions
Store and transport at temperatures from +5°C to +30°C.

Precautions

When working, follow general occupational hygiene rules. Keep out of reach of children. In case of contact with eyes or skin, rinse with water, and consult a doctor if necessary. The primer is non-toxic.

Disposal

Do not pour the product into drains, water bodies or onto the soil. Dispose of containers and dried primer as household waste.

Volume/weight

0.83 l / 1.2 kg – 2.07 l / 3 kg – 8.3 l / 12 kg

Паспорт безпеки Eskaro Kontakt Grunt
СЭС_6