Eskaro Ukraine is part of an international group Eskaro Group
Aura Dekor Grund

Aura
Dekor Grund

  • With quartz filler.
  • Resistant to atmospheric and mechanical influences.
  • Good vapor permeability.
  • Suitable for facade conservation.
  • Easy to apply with a brush and roller.
  • Simplifies the process of forming a "pattern" of decorative plasters
roku3

Properties Universal primer with quartz filler for subsequent application of structural materials. - Strengthens the surface. - Good adhesion to various types of surfaces. - Increases the adhesion of structural materials to the base by creating a strong rough structural surface with a fine pattern. - Significantly facilitates and reduces the cost of applying and modeling finishing structural materials. - Simplifies the process of forming a "pattern" of structural decorative plasters. - Facilitates the application of "liquid" wallpaper. - Has good vapor permeability and water resistance. - When using the primer on external surfaces, the overall water absorption capacity of the substrate is reduced, because water that penetrates through defective areas of the structural plaster is retained by the primer layer. - Prevents the appearance of stains on the surface of plasters caused by the characteristics of the substrate. - Water-based, white. - Due to the content of white pigment, it evens out the color background of the surface and increases the coverage of the finishing layer of the material. - Does not have an unpleasant odor. - For interior and exterior work. CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 1062-1:2012 EN 1062-1:2004 E4 | S2 | V2 | W2 | A0 | С0. Purpose It is used as an adhesive coating for the subsequent application of mineral plasters, dispersion acrylic plasters and putties, structural and smooth paints, "liquid" wallpaper, as well as for the preparation of protective and reinforcing layers (in "wet" thermal insulation systems) for finishing. Can be used for winter (seasonal) conservation of plastered facades. Can be used indoors as an independent structural decorative coating or in combination with smooth paints, structural paints, putties TM Aura or TM Eskaro, as well as with acrylic water-dispersion decorative varnishes and glazes. Types of surfaces for application Interior and exterior work. Any mineral bases: concrete, cement-lime, cement-sand plasters, putties, brick, protective and reinforcing layers in "wet" thermal insulation systems, etc. Interior work. Smooth, durable new and previously painted with enamel or oil paint bases: plasterboard, hard fiberboard, chipboard, plywood, etc.

Machine tinting

Base A - pastel colors

Quality standards

DSTU EN 1062-1:2012

Color
White.
Coloring
Machine tinting using the Eskarocolor system - over 8,000 shades in pastel (base A) tones. Manual tinting with TM Aura dyes in light tones (no more than 2% by volume).
Due to the use of natural fillers in the primer, slight color tone fluctuations are possible, therefore, on adjacent surfaces it is necessary to use material from the same batch or mix materials from different batches in advance in one container.

Consumption
Up to 5 m²/l (3.5 m²/kg) per coat. Consumption depends on application method.
Drying time
Dry to touch after 2 hours depending on the layer thickness at a temperature of +20°C and a relative humidity of 65%. The next layer can be applied after 24 hours. Completely dry for plastering after 5 days. At lower temperatures and higher humidity, the drying time increases.

Surface preparation before application

The surface must be dry, clean and have sufficient load-bearing capacity. Thoroughly remove dirt, flaking, weak, crumbling areas and substances that reduce the adhesion of the primer to the base (salts, dust, fats, oils, etc.). Fill cracks and potholes and seal with a suitable repair mortar or putty. Treat weak, porous or dusty surfaces with a strengthening primer TM Aura or TM Eskaro before applying Aura Dekor Grund. Treat metal parts with an anti-corrosion primer. Sand surfaces previously painted with enamel or oil paint, clean them of any flaking coating and dust that has formed. Fresh lime-cement surfaces should be aged for at least one month before priming. Mineral plasters can be applied 5 days after priming. Areas on the facade affected by mold or moss must be thoroughly cleaned mechanically, treated with the anti-mold agent TM Eskaro BIOTOL (or BIOTOL Spray) and dried.

Application

Mix before use. Before priming large areas with a tinted primer, mix a sufficient amount of primer in one container. Apply at air and substrate temperatures from +10ºС to +30ºС. When used as an adhesive coating (or for “winter” preservation of facades), apply the quartz primer with a structural foam roller (fur roller, brush) in 1 layer with a consumption of up to 5 m2/l.

Using quartz primer indoors as an independent structural material. As an independent structural material indoors, apply the primer in 1–2 layers with a structural foam roller. To reduce the consumption of primer and increase the coverage, it is recommended to paint the surface with one layer of smooth, washable matte paint tinted to the color of the finish coating before applying it. In this case, it will be enough to apply one layer of primer on top. To obtain various decorative surfaces after applying the primer with a foam structural roller, you can use textured rollers, brushes, spatulas and other tools for 10–15 minutes. After complete drying, you can apply appropriate water-dispersion materials (paints, varnishes) TM Aura, TM Eskaro to the resulting textured surface for an additional decorative effect.

Working tools

Foam, fur, structural roller. Brush.

Cleaning tools

Rinse with water immediately after use. Dried primer is cleaned mechanically.

Composition

Copolymer acrylic dispersion, pigment, quartz sand, fillers, functional additives, water. UA VOC limit value for this product (cat. A/7): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.

Warranty shelf life
3 years.
Frost resistance
Do not freeze.
Storage conditions
Store and transport in undamaged original, hermetically sealed packaging at a temperature of +5ºС to +35ºС. Do not freeze or expose to direct sunlight.

Precautions

During work, follow general rules of occupational hygiene. Work in a ventilated area, in work clothes, gloves. Store out of reach of children. In case of contact with eyes, rinse with water. The primer is fire and explosion-proof.

Disposal

The remains of dried primer should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.

Volume/weight

2.5 L (3.6 kg), 10 L (14.4 kg).

Паспорт безпеки AURA Dekor Grund
СЭС_3