Eskaro
Akrit 1 Ultimatt
- Forms a durable moisture-resistant coating.
- Forms a perfectly flat surface.
- Easy to clean
- Vapor permeable
Download data sheet 
Properties Acrylic deep matt paint, resistant to washing. - Ready to use. - Forms a durable moisture-resistant coating, resistant to washing and wet wiping (class 1 according to DIN EN 13300). - Has high adhesion to the surface. - Easy to roll. - Allows you to form a perfectly flat surface with high decorative characteristics and deep matt gloss. - Gloss of tinted paint: base A - no more than "2"; Base TR - no more than "5". - Base A paint (white) has 1 (highest) coverage class according to DIN EN 13300 if applied according to the manufacturer's recommendations. - Vapor permeable. - Additives in the paint composition contribute to easy removal of dirt without "glossing" the surface (if the manufacturer's recommendations for cleaning are followed). - Tinted according to the Eskarocolor system. - Water-thinnable. - Odorless. Gloss: deep matt according to EN 13 300 (ISO 2813). Wear resistance: class 1 according to EN 13 300 (ISO 11998). Purpose Acrylic deep matt wash-resistant paint for painting ceilings and walls in residential and office premises with normal humidity, where wet cleaning is used: living rooms, reception and meeting rooms, offices. For interior work. Types of surfaces for painting Used for interior work on new or previously painted with water-dispersion or alkyd paints: concrete, aerated concrete, gypsum plasterboard, silicate brick, putty or plastered surfaces, fiberboard and chipboard, as well as for structural surfaces, embossed, embossed and fiberglass wallpaper. Not suitable for painting floors, doors and furniture.
Base A - pastel colors
TR base - rich tones
EN 13 300 - standards for the classification of parameters of hiding power, gloss level, resistance to wet rubbing for water-borne paints and varnishes for interior wall and ceiling decoration.
ISO 11 998, ISO 2813 - methods for measuring parameters of gloss and wear resistance.
RYL - code of practice for construction, common in the EU; describes paint and varnish products, using generally accepted standards, to maintain proper quality in construction.
VOC (volatile organic compounds) - content in accordance with the European Union Directive 2004/42/CE
The quality of products and services is guaranteed by a quality management system in accordance with the ISO 9001 standard.
Surface preparation before painting
The surface must be clean, dry and degreased. Chalk and lime whitewash must be completely removed. Surfaces painted with glossy paint must be cleaned of peeling coating, treated with sandpaper until rough, degreased with 3-5% soda solution, rinsed with water and dried. Level out irregularities, cracks and potholes with acrylic putty. Prime unevenly absorbing surfaces with water-dispersion primer from the Aquastop series.
Application
For painting large areas with tinted paint, it is recommended to use paint from one production batch. If tinted paint from different production batches is available, it is recommended to mix them in one container beforehand. Attention! The coating acquires its final color after the paint dries. Mix the paint before use. Apply with a roller, brush or spray in 2 layers at ambient and substrate temperatures from +10°C to +25°C. For airless spray application, use a 0.015–0.019" nozzle. For spray application and first coat application with a roller, if necessary, the paint can be diluted with water no more than 5% by volume.
Features of using the TR base. The TR base (colorless) paint should be used only in a tinted form (according to the Eskarocolor system). Before applying the TR base, paint the surface in 1 layer with Eskaro Akrit 1 Ultimatt base A (white), which is tinted to a lighter shade of the color of the finish coating, so that as a result, complete overlap of the surface is achieved. Before applying the finish paint (TR base), the surface must have a uniform color without spots and "color transitions". Do not dilute the tinted TR base paint, apply in 2 layers. For saturated red, yellow, light green colors, it may be necessary to apply more layers to completely overlap the substrate.
Care of the painted surface
The coating acquires its final wear resistance approximately 4 weeks after application, therefore it is recommended to avoid intensive cleaning of the painted surface in case of contamination before the specified period. To wash (clean) the painted surface after it has reached its final wear resistance, use a soft sponge (soft microfiber cloth) and a little warm water, if necessary - neutral or weakly alkaline detergents. Clean with light movements, without rubbing the surface hard. Remove dirt immediately after it appears. After wet cleaning, wipe the surface dry. Do not use abrasive cleaning agents and organic solvents, as well as hard sponges and brushes.
Working tools
Brush, roller, sprayer.
Cleaning of tools
Rinse with water immediately after use. Dried paint is cleaned mechanically.
Product information is based on laboratory research results and practical use. The manufacturer cannot be held responsible for damage caused by failure to follow the instructions for use or violation of storage terms and conditions.
Precautions
Keep out of reach of children. Follow general occupational hygiene rules. Work in work clothes, gloves. To prevent accidents, it is recommended to use basic personal protective equipment. In case of paint contact with eyes, rinse with plenty of water. Use water to clean surfaces and objects contaminated with paint. The paint is fire and explosion-proof.
Disposal
Do not pour into drains. Do not throw into the environment. Dried paint residues must be disposed of as household waste, polymer containers must be collected for recycling or disposed of as household waste.