Download data sheet 
Properties Matt acrylic paint for exterior and interior work. - Ideal for uneven and porous surfaces. - Has very good coverage (base A). - Increased adhesion with various substrates allows use on smooth surfaces that are difficult to paint. - Creates a weather-resistant, elastic protective coating. - Easily washable. - Maintains color saturation. - Vapor-permeable, does not interfere with the natural breathing of surfaces. - Tinted using the Eskarocolor system. - Ideal for complex repair work. CLASSIFICATION ACCORDING TO THE STANDARD DSTU EN 1062-1:2012 EN 1062-1:2012 | G3 | E2 | S1 | V2 | W2 | A0 | С0. Purpose Painting facades and interiors. It is also used to create matte coatings that are resistant to washing indoors. For exterior and interior work. Types of surfaces for painting New or previously painted with water-dispersion paints mineral bases - concrete, silicate brick, putty, plastered and other porous surfaces, as well as drywall, wood materials, glass wallpaper, etc. It is possible to apply it to finished elements made of heavy concrete. In this case, the paint is diluted with water up to 10%.
Base A - pastel colors
TR base - rich tones
Підготовка поверхні перед фарбуванням
Before painting, clean the working surface from dust, chalk and lime whitewash, weak plaster and putty coatings, oil, bitumen and other contaminants.
Clean weak and contaminated areas with a spatula or metal brush and remove dust.
Any deep surface defects (potholes and cracks) should be leveled with acrylic putty.
To obtain a high-quality and durable coating, as well as to level the absorption capacity (to avoid the formation of stains), it is recommended to pre-treat the base to be painted with a water-dispersion acrylic primer TM Aura or TM Eskaro.
In the case of application over old paint during restoration work, it is necessary to check the compatibility of the coatings on a small area of the surface.
At least 3 weeks should pass between applying a fresh cement plaster layer and painting.
Application
Caring for the painted surface
For 3-4 weeks after applying the paint, until it has reached its final hardness and wear resistance, handle the surface with care.
Use soft sponges and cloths for cleaning.
Strong friction can make the surface glossy.
We recommend using water, neutral and medium alkaline detergents (pH up to 9) for washing.
Do not use organic solvents, abrasive cleaners, or hard sponges and brushes.
Use Biotol and Biotol Spray to remove mold.
Working tools
Brush, roller, sprayer.
Cleaning tools
Wash with soap and water immediately after use. Dried paint can be cleaned mechanically.
Polymer acrylic dispersion, titanium dioxide (for base A), excipients, water. UA VOC limit value for this product (cat. A/1): 30 g/l (g/l). This product contains max 30 g/l (g/l) VOC.
Precautions
During work, follow general occupational hygiene rules. Work in a ventilated area, wear work clothes, gloves. Keep out of reach of children. If in eyes, rinse with water. The paint is fire and explosion-proof.
Disposal
Remains of dried paint should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
Base A: 1 L (1.48 kg) - 2.5 L (3.7 kg) - 5 L (7.4 kg) - 10 L (14.8 kg) Base TR: 0.9 L (1.28 kg) - 2.25 L (3.2 kg) - 9 L (12.8 kg)