Grover
FS 100
- Bonding and sealing in areas
- prone to high temperatures
- Increased moisture resistance
- High chemical resistance
- Long-lasting elastic seam
- UV resistant
Download data sheet Properties High-temperature silicone sealant - Does not shrink. - Forms a heat-resistant, fire-resistant, smoke-proof elastic seam. Withstands temperatures up to 315 °C. - Has excellent adhesion to most building materials. - Resistant to thermal deformations. - Suitable for rooms with high humidity, in particular for baths and saunas. - Elastic sealing when installing ventilation, heating, water supply systems, kitchen equipment. - Replaces any seals made of cork, felt, paper, asbestos, rubber. - For repairing automobiles and motorcycles (except seals and parts in contact with fuel). Restrictions: do not use for sealing aquariums, materials made of Teflon, polyethylene, polypropylene, bitumen. Purpose - Use in movable joints. - Sealing joints, filling cracks in heating and heating devices, chimneys, ventilation ducts and other structures exposed to high temperatures. - Used for sealing the head of automobile engines. - Recommended surfaces: ceramics, glass, metal, galvanized and chrome-plated materials, stainless steel, aluminum, enameled surfaces, plastic (hard PVC, polycarbonate), cement, brick, wood and its derivatives, natural stone, enamel, vulcanization and silicone rubber. - For interior and exterior work - For rooms with high humidity
Surface preparation
The surfaces must be solid, dry and clean. Treat oily surfaces with GROVER CLEANER or acetone. Apply masking tape to the edges of the joint to protect the surfaces from excess sealant. Maximum joint width - 30 mm. Optimal ratio of joint width to depth 2:1. Cartridge preparation Before use, store the sealant at room temperature for at least 12 hours. Insert the cartridge into the applicator gun, cut off the screw head of the cartridge above the thread. Screw on the tip, cut the tip top at an angle of 45° according to the width of the joint.
Application
Evenly fill the joint with sealant and level with a damp spatula or hand. Remove the masking tape immediately.
Cleaning the tool
Before hardening - with white spirit. After hardening - mechanically.
Operation
In sanitary areas, it is recommended to thoroughly clean the seams once a week with a household disinfectant.
Acetate-cured silicone polymer, modifying additives
Base: Polysilicon
Curing system: Chemical curing (acetate).
Shore hardness: A 27
Elongation at break: ≥112%
Adhesion to wet substrates: No
Paintability: No
Curing speed: 3-4 mm per day
Maximum joint width: 30 mm
Application temperature: from +5°C to +40°C
Thermal resistance: from -65°C to +300°C, briefly up to +315°C
Precautions
Keep out of reach of children. Contains biocidal products: 4,5 - dichloro-2-octyl-2H-iothiazol-3-one EUH210 Safety data sheet available on request.
Disposal
Dispose of product residues and empty packaging as household waste.
Cartridge 300 ml;