Download data sheet Properties Single-sided paper masking tape. - Has good adhesion (adhesive ability) to various surfaces. - Reliably protects the surface from dirt. - Easy to use (tear off by hand). - Easy to dismantle. - Does not damage the surfaces to which it is glued. - Leaves no traces of glue after removal. - The ends of the tape are protected by vacuum packaging. - For interior work. Purpose Used to protect surfaces during painting and other repair and construction work. Surface types Concrete, plaster, putty, gypsum, drywall, fiberboard, chipboard, etc.
Surface preparation
Clean the surface from dirt, dust and grease. The surface must be sufficiently strong, clean and dry. Flaking material and old weak coatings must be removed.
Application
Substrate, tape and air temperature during application: from +5 °C to +35 °C. At lower temperatures, the adhesion of the adhesive layer of the tape becomes weaker. Stick the tape to the surface that needs to be protected from paint or other contaminants. Start painting immediately after sticking the tape. Remove the tape before the paint (varnish) dries.
Adhesion to steel 2.8 N/cm
Elongation at break 10%
Heat resistance +60 °C
Thickness 100 μm
Paper, hot-melt adhesive (synthetic rubber)
Store the product at a temperature of +21 °C.
Transportation at negative temperatures is allowed (no longer than 2 days).
Packaging (rolls) Width × length: 19 mm × 20 m; 25 mm × 20 m; 30 mm × 20 m; 38 mm × 20 m; 48 mm × 20 m. 19 mm × 40 m; 25 mm × 40 m; 30 mm × 40 m; 38 mm × 40 m; 48 mm × 40 m.