Condor
Silikon Putzgrund
- Silicone.
- Adhesive primer.
- Quartz filler.
- Facade preservation.
Download data sheet Properties Universal silicone adhesive quartz primer for subsequent application of silicone structural materials. - Strengthens the surface. - Increases the adhesion of structural materials to the base by creating a strong rough structural surface with a fine pattern. - Significantly facilitates and reduces the cost of applying and modeling finishing structural materials. - Simplifies the process of forming a "pattern" of structural decorative plasters. - Has excellent vapor permeability and good water resistance due to the presence of silicone resins. - When using the primer on external surfaces, the overall water absorption capacity of the substrate is reduced, since water that penetrates through defective areas of the structural plaster is retained by the primer layer. - Prevents the appearance of stains on the surface of plasters due to the characteristics of the substrate. - Due to the content of white pigment, it evens out the color background of the surface and increases the coverage of the finishing layer of the material. - Facilitates the application of "liquid" wallpaper. - Water-based, white. - Has no unpleasant odor. - For interior and exterior work. Purpose Used as an intermediate adhesive coating: for preparing protective and reinforcing layers for finishing in facade systems of "wet" thermal insulation (mineral wool, polystyrene foam); for subsequent application of silicone and acrylic water-dispersion materials (decorative plasters of the "bark beetle" and "lamb" type, structural paints, putties, smooth paints), mineral (cement and lime-cement) "dry" decorative plasters; for surface preparation before applying "liquid" wallpaper. Can be used for winter (seasonal) preservation of plastered facades. Can be used indoors as an independent structural decorative coating or in combination with smooth paints, structural paints, putties TM Condor or TM Eskaro, as well as with acrylic water-dispersion decorative varnishes and glazes. Types of surfaces for application It is applied to any mineral bases (concrete, cement-lime, cement-sand plasters, brick, adhesive mixtures of "wet" facade insulation systems, etc.), as well as to smooth, durable bases (gypsum board, hard fiber boards, chipboard, plywood, etc.). Interior and exterior works: Any mineral bases: concrete, cement-lime, cement-sand plasters, brick, adhesive mixtures of "wet" facade insulation systems, etc. Interior work: Smooth, solid new and previously painted enamel or oil-based substrates: plasterboard, hardboard, chipboard, plywood, etc.
Base A - pastel colors
DIN EN 1062-1:2012 | E4 | S2 | V2 | W2 | A0 | C0.
Surface preparation
The surface must be dry, clean and have sufficient load-bearing capacity. Thoroughly remove dirt, flaking, weak, crumbling areas and substances that reduce the adhesion of the primer to the substrate (salts, dust, fats, oils, etc.). Fill cracks and potholes and seal with a suitable repair mortar or putty. Treat weak, porous or dusty surfaces with a strengthening penetrating primer TM Eskaro or TM Condor before applying Condor Silikon Putzgrund. Treat metal parts with an anti-corrosion primer. Treat surfaces previously painted with enamel or oil paint with sandpaper, clean off any flaking coating and dust that has formed. Fresh lime-cement surfaces should be aged for at least one month before priming. Areas on the facade affected by mold or moss must be thoroughly cleaned mechanically, treated with the anti-mold agent BIOTOL (or BIOTOL Spray) and dried.
Application
Mix before use. Before priming large areas with tinted primer, mix a sufficient amount of primer in one container. Apply at air and substrate temperatures from +10 ºС to +30 ºС. When used as an adhesive coating (or for "winter" preservation of facades), apply quartz primer with a structural foam roller (fur roller, brush) in 1 layer with a consumption of up to 3.6 m²/kg (up to 5 m²/l).
Using quartz primer in interior finishing works as an independent structural material: apply the primer in 1-2 layers with a structural foam roller. To reduce costs and increase the coverage of the primer before applying it, it is recommended to paint the surface with one layer of smooth, washable matte paint (for example, Condor Mattlatex), which is tinted to the color of the finish coating. In this case, it will be enough to apply one layer of primer on top. To obtain various decorative surfaces after applying the primer with a foam structural roller, you can use textured rollers, brushes, spatulas and other tools for 10-15 minutes. After complete drying, you can apply appropriate water-dispersion materials (paints, varnishes, "azures") of TM Condor, TM Eskaro for an additional decorative effect.
Copolymer acrylic dispersion, silicone resins, pigment, quartz sand, fillers, functional additives, water.
Precautions
During work, follow general rules of occupational hygiene. Work in a ventilated area, in work clothes, gloves. Store out of reach of children. In case of contact with eyes, rinse with water. The primer is fire and explosion-proof.
Disposal
The remains of dried primer should be disposed of as household waste, polymer containers should be collected for recycling or disposed of as household waste.
3.55 kg, 14.2 kg