Bathroom renovation
As a result of long-term development, the manufacturer of paints and varnishes Eskaro can offer the consumer a complete high-quality set of products for repairing and painting surfaces in rooms with high humidity.
The kit consists of paint for rooms with constant humidity Akzent SPA, anti-mold agent Biotol , permeable biocidal primer-moisture insulator Aquastop Bio and moisture-resistant putty Aura Luxpro Aqua Spackel .
Water-based paint Akzent SPA contains safe for humans, antibacterial substances and means that prevent the appearance of mold.
When developing this kit, Eskaro employees proceeded from the principle of preventing problems in rooms with high humidity. For example, in bathrooms of old houses, where there is often poor ventilation, which leads to the appearance of mold.
Using the described kit for bathrooms and other rooms with high humidity leads to a result that is in some ways even better than tiling, since there are no gaps left on the painted walls from where mold can spread.
Note: Surfaces that are not subject to constant direct exposure to water should be painted.
Using paint of different shades, which can be selected from the catalog Eskarocolor , You can create a cozy atmosphere in the bathroom.
This paint can be used to paint not only bathroom walls, but also walls in schools, swimming pools, hotels and other rooms with increased operational and hygienic requirements.
How to renovate rooms with high humidity
Before renovating rooms with high humidity, first of all you need to think about what can be done to improve the ventilation in the room.
Then you need to identify all the so-called “weak spots” in the room. For example, places that need cleaning or where there is old peeling paint that needs to be removed.
Bathroom walls in old houses are mostly covered with alkyd or oil paint. In the past, this was the only way to paint surfaces in rooms with high humidity.
Such smooth surfaces need to be given a matte finish (roughness) in order to improve the adhesion (adhesion) of the new paint layer. Surfaces to be repaired should first be cleaned of visible mold and then the mold in the surface layer of the coating should be destroyed using a special mold-killing agent Biotol. Cracks, depressions and voids in the walls are filled with a special moisture-resistant putty Aura Luxpro Aqua Spackel. After puttying, the walls should be cleaned, sanded and dusted with a damp cloth or vacuumed. Areas covered with clean putty should be treated with a biocidal moisture-proof primer Aquastop Bio.
Paint Akzent SPA, resistant to moisture, forms a layer that protects surfaces from mold. Paint Akzent SPA belongs to the first category of wear resistance paints (according to DIN EN 13300), intended for surfaces exposed to moisture.
Additional useful information
Use mold prevention products in the bathroom. Use a product for this purpose Biotol. Biotol - The concentrate is economical to use. Dilute with water for use. Clean all surfaces and cracks damaged by moisture.
Inspect all weak spots, remove old, peeling paint.
Surfaces covered with old alkyd or oil paint should be given a matte finish (roughness) in order to improve the adhesion of the new layer of paint. After sanding, remove dust.
Fill the walls and fill all recesses. Use Aura Luxpro Aqua Spackel putty for this.
Treat the areas covered with putty (porous) with a moisture-proof primer Aquastop Bio.
To obtain a uniform layer of paint when priming porous surfaces, be sure to use Aquastop series moisture insulators.
Use acrylic paint for painting walls Akzent SPA. Be sure to apply two coats of paint, allowing the first coat of paint to dry for 1.5 hours.
And after a month, freshly painted walls can be washed using household detergents.
