Download data sheet 
Properties Decorative plaster for creating natural stone effects. - Plastic, easy to apply with a trowel, roller, spatula. - Does not require perfect leveling of walls. - Hides minor surface irregularities. - Has good adhesion to the base. - Easily sanded with a stainless steel trowel. - The texture and degree of gloss of the surface depend on the application technique. - Forms a strong and elastic coating, resistant to wet cleaning. - Water-thinned acrylic. - Vapor-permeable. - Environmentally friendly. - Tinted in light and bright saturated colors. - For interior work. Purpose Decorative plaster based on marble filler allows you to create the effects of polished marble ("marmorino", "grotto"), hewn stone ("travertine"), crumbling natural stone, as well as the effects of other mineral surfaces. Recommended for high-quality decoration of interior spaces (residential, office, shops, restaurants, bars, etc.), including surfaces with high operational load. Types of surfaces for application Mineral bases (plaster, concrete), gypsum plasterboard, MDF, etc.
"Travertine": from 1.5 kg/m2.
Consumption depends on the type of structure.
Surface preparation
The surface must be dry, clean and strong. Fresh lime-cement (cement) surfaces must be kept for at least one month. All kinds of contamination, peeling, old paint and varnish coatings, wallpaper, weak and crumbling areas, and substances that reduce the adhesion of decorative plaster to the base (dust, fats, oils, etc.) must be carefully removed. Areas affected by mold or fungus must be thoroughly cleaned mechanically, treated with BIOTOL (BIOTOL Spray). Cracks and potholes must be filled and sealed with a suitable repair mortar or putty. To obtain a uniform structure and reduce the consumption of decorative plaster, it is recommended to level the surface well. Porous surfaces or surfaces that are dusty should be treated with a penetrating primer TM Eskaro or TM Condor. Apply one layer of adhesive primer with mineral filler Condor Dekogrund 16. When using tinted decorative plaster, it is necessary to tint the adhesive primer to a color close to the color of the plaster.
Application
Mix before use. Attention! Work on one plane should be carried out without interruption, from corner to corner of the room or within relief elements, and plaster from one batch should be used for this. If there are plasters from different batches of manufacture, as well as when using tinted plaster, it is necessary to mix them together in the required quantity. During application and drying, the temperature of the air, material and base should be from +10 °C to +25 °C. Avoid drafts, do not apply the material at high (above +30 °C) air temperatures, on a heated (above +30 °C) surface, under direct sunlight.
Application in the "travertine" style. Apply the plaster to a properly prepared surface with an intermediate layer of primer. Apply the material to the surface in an even layer with a stainless steel spatula (or trowel), or give a slight relief for a more voluminous effect. Form longitudinal or circular potholes with a trowel (or brush) to imitate the veins of travertine stone. After 15-20 minutes (depending on temperature and humidity), after the plaster dries, it must be smoothed (sealed) with a stainless steel trowel. Before the plaster dries completely, it must be polished (polished) with a stainless steel trowel. After the plaster dries, it is recommended to apply decorative colored wax (or protective varnish) to the surface to create a deeper voluminous effect of the pattern structure.
Decorative plaster can be applied using different techniques to achieve different effects. The procedure for applying decorative plaster to create Marmorino, Grotto effects, as well as other types of structures can be viewed on the website www.eskaro.com.
Working tools
Stainless steel trowel, plastic trowel, spatula, roller, brush.
Cleaning of tools
After use, rinse with water. Dried material is cleaned mechanically.
Copolymer acrylic dispersion, marble fillers, functional additives, water. UA VOC limit value for this product (Cat. A/l): 200 g/l (g/l). This product contains max 200 g/l (g/l) VOC.
Precautions
During work, follow general rules of occupational hygiene. Work in a ventilated area, in work clothes, gloves. Keep out of reach of children. In case of contact with eyes, rinse with water. The product is fire and explosion-proof.
Disposal
Residues of dried material and plastic containers should be disposed of as household waste.
4.5 kg - 15 kg